Amphenol CIT's stand-offs were created for ease of visual inspection by color coding to indicate height and made from aerospace grade aluminum for additional weight savings. Our Male/Female Threaded Hex Stand-offs are ideal for clamping wire bundles or tubes away from a bulkhead or to route through various structural installations.
Constructed from aerospace grade aluminum for additional weight savings.
Color-coded to visually represent the various height dimensions which makes installation and repair quicker and easier as you will not have to measure the stand-off height.
FAA design approval is available for select airframes.
Product Table
P/N
Length (est)
Length (act)
Color
200-13531-0375
short
0.375
blue
200-13531-0625
short
0.625
green
200-13531-0750
short
0.750
orange
200-13531-1125
medium
1.125
red
200-13531-1250
medium
1.250
brown
200-13531-1375
medium
1.375
blue
200-13531-1625
medium
1.625
green
200-13531-1750
medium
1.750
orange
200-13531-2125
long
2.125
red
200-13531-2250
long
2.250
brown
200-13531-2375
long
2.375
blue
200-13531-2625
long
2.625
green
200-13531-2750
long
2.750
orange
200-13531-3
steel
0.500
stainless steel
200-13531-4
steel
1.000
stainless steel
Installation Notes
These stand-offs do not contain thread locking features. Appropriate anti-vibration locking should be applied. (i.e. lock washer, thread locking adhesive, etc.)
Installation of aluminum male threads into steel locking nuts is not recommended.
Installation torque is 25 in-lb maximum, 20 in-lb is recommended.
The configuration shown below is not possible, but it is noted here due to the fact that it has been a common design/assembly oversight. (Threads bottom out.)
More Information
To inquire about Stand-Offs available from Amphenol CIT, please fill out the form below, and one of our Sales Engineers will contact you.
